SETTINGS
Setting and storing radio sta-
tions ...
... with the automatic station search
When the device is first connected to the mains or
the batteries are first inserted, the device begins
an automatic FM station search and stores the
first ten stations with strong signals on the preset
buttons 1 to 10.
However, you can also tune stations manually
and store them on the preset buttons.
... manual
1
Press »ON/OFF« to switch on the device.
2
Keep pressing
»TUNING
+« until you reach the frequency you want.
– Display: the frequency changes in 50 kHz
steps;
or
–« or
press
»TUNING
proximately one second.
– The automatic search stops at the next sta-
tion with a strong signal.
3
Press »M« to activate the memory function.
– Display: the number of the first preset
flashes.
4
Press the desired preset button »1« till »5« and
confirm by pressing »M«.
– Display: the frequency, »I« and then the sta-
tion name.
Notes:
For the program positions 6 - 10, first press
7
»+5«.
If you do not press any button within 8 seconds,
7
the device will quit memory mode without mak-
ing any changes.
Setting the time
1
With the device switched off, keep pressing
»MODE« until the time flash in the display.
2
Press
»TUNING
–« to set the hours step-by-
step.
_______________________________________________________________
–« or
»TUNING
+« for ap-
»TUNING
3
+« briefly to set the minutes
Press
»TUNING
step-by-step.
4
Confirm the setting by pressing »MODE«.
– Display: the current time.
ENGLISH
17