Publicidad
Idiomas disponibles
Idiomas disponibles
Power on the System / Schalten Sie das System ein / Mise sous tension du système
/ Encienda el sistema / Ligue o sistema / Het systeem inschakelen / Accensione del
sistema / Włączanie systemu / Zapnutí systému / Slå på systemet / Pornire sistem
/ Включване на системата / Tænd for systemet / Ρεύμα στο σύστημα / Süsteemi
sisselülitamine / Kytke järjestelmän virta päälle / Napajanje sustava / Rendszer áram
alá helyezése / Įjungti sistemą / Ieslēdziet sistēmu /pnite system / Vklopite sistem /
Sistemin Gücü / Ligar o Sistema
Step 1: First turn on the AC breaker on the branch circuit and then the main AC breaker of
the house.
Step 2: Wait for about 2 minutes until the system is initiated.
LED Indicator Status / LED-Anzeige-Status / État du voyant LED / Estado del indicador
LED / Estado do indicador LED / LED-indicatielampje status / Stato dell'indicatore LED
/ Stan wskaźnika LED / Stav LED kontrolky / LED-indikatorstatus / Stare indicator LED /
Състояние на светодиодния индикатор / Indikatorstatus / Κατάσταση ένδειξης LED /
LED-tule olek / LED-merkkivalon tila / Status LED pokazivača / LED jelzőfény állapota
/ LED indikatoriaus būsena / LED indikatora statuss / Stav LED indikátora / Status
indikatorja LED / LED Gösterge Durumu / Status do indicador LED
LED Indicator Status
Yellow light flash
Yellow light steady on
Green light flash (5s)
Green light flash (2s)
Red light flash (2s)
Red light steady on
About 10s after connection with DC power, the light turns yellow;
The yellow light flashes for 10s continuously and then keeps steady on which stands for microinverter self-check;
Afterwards, if the system is not powered on, the red light will flash, indicating for no grid existence;
After microinverter connects with DC power for the first time, red light flashes indicates for errors during microinverter
startup.
58
<2.4 m
Microinverter startup. If the light flashes once in 1s, flashes in 10s or still flashes
after 10s, microinverter startup fails.
Microinverter standby/self-checking.
Normal operation; normal AC grid; communicating with routher.
Normal operation; normal AC grid; no connection with routher.
No AC grid or AC grid outside the regulatory range.
Error: non-grid abnormal fault. Machine fault like grounding detection fault and
PV side fault.
Black-N
Green/Yellow-PE
Description
AC junction box
Red-L
Distribution
panel
Publicidad
