Denon TU-550 Instrucciones De Operación página 7

MPX NR (MPX NR indicator)
This LED indicator lights up when the MPX NR button @ is
pressed and this circuit is operated.
SIGNAL (Signal-Strength Indicators)
The number of LEDs that light increases in correspondence
With the strength of the signal being picked up by the
antenna.
ENGLISH
CHANNEL (Channel Indicator)
DIGITAL FREQUENCY INDICATOR
Reception frequencies are digitally indicated with numbers.
The FM frequency unit is MHz; the AM frequency unit is
kHz.
® MEMORY (Memory Indicator)
This indicator lights when the MEMORY button @ is
pressed.
FM OUTDOOR ANTENNA
PREMAIN AMPLIFIER CONNECTING
THE TUNER
AM LOOP ANTENNA
f
DENON есюн auo COMPONENT -masu SERO turer
EES "on le
STEREO MONO AUTO MANU SHIFT (IE)
ATTACH TO THE HOLDER
TU-550
AT 8n 20
OPERATOIN INSTRUCTIONS
PREPARATION
CHECKING CONNECTIONS
e Check that all the cords are firmly connected.
* Turn on the power with the POWER switch after checking all the connections.
CHECKING ANTENNA
1. Do not incorrectly connect the loop antenna. If you are not sure how to connect
the loop antenna, refer to Fig. 1
Multi-voltage model only
Setting the frequency step
Set the FREQUENCY
STEP switch as described below.
@ Inthe U.S.A. and Canada - set the switch to 100 kHz/10
kHz side.
CAUTION
L back, preset the stations again.