Num'axes PIE1067 Manual De Instrucciones página 38

Timer 1
Timer 2
Sendings/day
Date format
Battery type
GPS
GPS alert
ON | OFF
ON | OFF
Each day, the device can operate 24 hours a day
(parameters set to OFF) or only during the time
slot(s) defined by the user.
Select ON to set the start time and end time of the
desired working period.
Example: If Timer 1 is set to 15:00-18:00 and
Timer 2 is et to 20:00-22:00; each day, the camera
will work only between 15h00 (03:00 PM) and
18h00 (06:00 PM) then between 20h00 (08:00 PM)
and 22h00 (10:00 PM).
Unlimited | 1 – 99
Example: if you select 50, every day, the camera
will only send the 50 first photos taken to the cloud
storage. The rest of the photos taken that day will
not be sent but will be stored in the memory card.
MM/DD/YYYY | DD/MM/YYYY
Alkaline | Ni-MH | Lithium
The device will perform better and have better
battery life if you select the type of the batteries
used in the camera.
ON | OFF
With GPS ON, the GPS information will be shown
on photo stamp.
NOTE: if the GPS signal is weak around the product,
the GPS information will not be shown on the
photo stamp until the signal gets stronger.
ON | OFF
With the GPS Alert setting set to ON, if the camera
leaves a circle with a diameter of 1 km around the
GPS position recorded at startup, you are alerted
by a notification.
Guide PIE1067 – Février 2024 – ind. A - 38/128