Publicidad
Idiomas disponibles
Idiomas disponibles
Pin Assignment
Follow the instructions below to connect the PL70Oi to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signal connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter, and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL >
15
11
Pin assignments of 15 pin mini D-Sub connector
1
| Redvideosignal
—^ — ^^ |
|
2
| Greenvideosignal
—
|
| | 3
| Bluevideosignal
č ^
|
IA -- - --
O
|
5
X | Ground*
Cs
| | 6
| Ground for Red video signal —
|
8
| Ground for Blue video signal — |
|
9
| Unsed
«— — —
— ü |
|
vo
| Ground
|
SDA'
(Bi-directional Data
| 13
|
Horizontal sync. signal
Vertical sync. signal
SCL* (Data Clock)
+: "VESA's Display Data Channel (DDC) Standard
C. Signal connector: BNC connector
Sync on green system
Connect the signal cable to RED, GREEN (sync
ongreen) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H / V composite) BNC connectors.
Separate sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC and V-SYNC BNC connectors.
Note : If your computer's video output is over 110 MHz, it is recommended that
it be used with the BNC connectors.
a Bas
Publicidad
