Descargar Imprimir esta página

Panasonic PanaFync/Pro PL70i Manual De Instrucciones página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjustment menu
L4
Geometry
. Press the [2] key to select the vertical pincushion / vertical pincushion
corner / side pincushion balance / trapezoid / parallelogram adjustments.
Press the [1] key to save the adjustment.
LT V. Pincushion : rhe image can be corrected for barrel distortion.
Press the [4 key to decrease the Pin / Barrel distortion of the
image, the >] key to increase it.
11 V. Pin. Corner : The image can be corrected for vertical pincushion distortion in
the four corners.
Press the [4 key to decrease the V. Pin. Corner distortion, the
key to increase it.
CT Side Pin. Bal. : ttis possible to adjust the side pincushion balance to the left
and right.
Press the (4 key to expand to the left of the image, the BP) key
to expand it to the right.
EX Trapezoid : The image can be corrected for trapezoidal distortion.
Press the [4 key to make the top edge narrower, the Pl key to make
the bottom edge narrower.
L/ Par allelogram : The image can be corrected for parallelogram distortion.
Press the [4 key to collapse the parallelogram to the left, the P
key to collapse it to the right.
eae
ia ia ea
aia
i
i ei
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
ee
tL)
Rotation : this control adjusts the evenness of the screen image relative to a horizontal line.
Press the [4 key to rotate the image slightly counterclockwise, the P] key to
rotate the image slightly clockwise.
Note: If the [4 and bi keys are pressed at the same time, the standard level (50)
will be set.
==
==
===
==
==
===
===
==
==
==
i
i
i
ie
i
eae
ee
-m
===
a
ae < -.
Color Temp . It is possible to switch the whiteness of the image.
1) Press the [4 and P keys to select 1 (9300K + 8MPCD) / 2 (7500K) /
3 (6500K) / 4 (5000K) / 5 (User).
2) [2] will be displayed at the bottom right-hand side of the on-screen
panel when 5 (User color) has been selected. Press the [2] key on
the front operation area to enter the User color adjustment screen.
User : itis possible to adjust the whiteness of the image to suit personal preference.
1) Select R (red), G (green), B (blue) with the (2] key.
2) Adjust the color to match personal preference with [4 and >) keys.
* As user colors cannot be recalled, take notes of the set values beforehand.
==.
==.
===
==
==
===
==
==
==
a
i
ee
ee
i
ee
o
ee i
eee
==
===
a
a
< -. ee
.-
€»
Recall : itis possible to return to the initial settings (the settings at the time of factory
shipment).
1) When the [1] key (Yes) is pressed, the settings are recalled and the menu screen
returns. (Recall = return to initial settings (settings at time of factory shipment))
2) When the [2] key (No) is pressed, the menu screen returns without the settings being
recalled. (The settings return to what they were immediately before the recall.)
If there are no operations performed for about 30 seconds, the screen goes off
without a recall.
2
2 —
2€) Video Level : The video input signal level can be matched to the computer being used.
Either 0.7 V or 1.0 V can be selected with the [2] (0.7 V / 1 V) key.
Use 0.7 V under normaly.
qa

Publicidad

loading

Este manual también es adecuado para:

Tx-d7s55