Spare Parts - Fimap UP36 Manual De Uso Y Mantenimiento

ATTENTION: Thoroughly clean the bristles of the roller and
the drive belt (brush or vacuum).
13. Wind the drive belt (14) around the toothed drive pulley (15)
(Fig.13).
14. Wind the drive belt (14) around the pipe toothed pulley (16)
(Fig.14).
15. Insert the brush (13) into the brush head unit (Fig.15), making
sure to position the brush supports into the housings on the brush
head unit.
ATTENTION: the toothed part (Fig.16) of the supports must
face towards the lower part.
15
13
18
17
17
1
4
5
16. Insert the brush cover casing (10) over the brush head unit, make
17. Insert the vacuum motor air outlet filter (9) into the appliance
18. Insert the vacuum motor air inlet filter (8) into the appliance
19. Insert the dust bag (7), making sure to correctly insert the bag in
20. Turn the dust bag locking lever (6) (Fig.5)
21. Insert the front casing (4) on the appliance (Fig.4).
16
14

SPARE PARTS

30
sure that it fits perfectly in the front of the appliance.
(Fig.8).
(Fig.7).
the vacuum nozzle (17) inside the body of the appliance and not
to damage the cardboard support (18) on the bag itself (Fig.17).
13
15
2
16
3
1
6
7