Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Lights (On/Flashing) and Condition
On: FAULT
Flashing: LINE, 50%
Condition: No Output due to Low
Output Voltage and Abnormal Input
On: FAULT, 25%
Flashing: LINE
Condition: No Output due to High
Bus Voltage and Abnormal Input
On: FAULT
Flashing: LINE, 25%
Condition: No Output due to Low
Bus Voltage and Abnormal Input
Flashing: LINE, FAULT
Condition: No Output due to High
Internal Temperature and Abnormal
Input
Battery Replacement
Battery Replacement Door: Under normal
conditions, the original UPS battery will last
several years. Battery replacement should be
performed only by qualified service personnel.
Refer to "Battery Warnings" in the Safety
section. Should your UPS require battery
replacement, visit www.tripplite.com/products/
battery-finder/ to locate the specific
replacement battery for your UPS.
Procedure
1
Remove Front Panel
2
Disconnect Batteries
3
Remove/Dispose of Batteries
4
Add Batteries
5
Connect Batteries
Attach connectors: black-to-black and red-
to-red.
6
Replace Front Panel
17-05-032-932471.indb 14
Solution
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Check the UPS to be sure that there is adequate
space for air to circulate near the vents and that
the fan is working properly. Restart the UPS. If
the problem persists, contact Tripp Lite for
repairs.
1
2
3
14
6
5
4
5/23/2017 1:41:52 PM
Publicidad
