Descargar Imprimir esta página

Tripp-Lite SmartOnline AGPS5542 Serie Manual Del Propietário página 8

Sistemas ups en línea con montaje en bastidor/torre

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
4
External Battery Pack Connector (configuration varies by model):
Use to connect optional Tripp Lite Battery Packs for additional runtime. Use only Tripp Lite
external battery packs with overcurrent protection. Adding external batteries will increase
recharge time as well as runtime. Installation should be performed by qualified service
personnel only. Refer to the battery pack owner's manual for complete installation
instructions. Make sure cables are firmly inserted into their connectors. Small sparks may
result during battery connection; this is normal. Do not connect or disconnect battery packs
when the UPS is operating on battery power. The following battery packs are available in the
table below. Contact Tripp Lite Customer Support at 773.869.1234 for assistance in
determining the appropriate Tripp Lite battery pack to connect.
24V Battery Packs
Model
BP24V15RT2U
BP24V28-2U
BP24V36-2US
BP24V70-3U
When connecting to two-conductor external battery packs, be sure to use the ground strap
included with the external battery packs to bond the battery packs to the metal enclosure of
the UPS in accordance with your external battery pack Owner's Manual.
Note: Three-conductor battery packs are equipped with a ground bond plug. Refer to the battery pack
instructions for complete connection information and safety warnings.
17-05-032-932471.indb 8
48V Battery Packs
Amp-Hour
Rating
Model
14 Ah
BP48V24-2U
28 Ah
BP48V27-2US
36 Ah
BP48V60RT-3U
70 Ah
72V Battery Packs
Amp-Hour
Rating
Model
18 Ah
BP72V15-2U
27 Ah
BP72V18-2US
42 Ah
BP72V28RT-3U
8
Amp-Hour
Rating
15 Ah
18 Ah
28 Ah
5/23/2017 1:41:45 PM

Publicidad

loading