Bosch GLM Professional 80+R60 Manual Original página 27

OBJ_BUCH-1347-008.book Page 27 Monday, December 21, 2015 3:09 PM
Cause
Battery charge-control indicator (g) and "ERROR" indi-
cation in the display
Battery charging voltage not cor-
rect
Battery charge-control indicator (g) and clock symbol (f)
in the display
Charge duration clearly too long,
as charging current too low.
Measuring result not plausible
The target surface does not reflect
correctly (e.g. water, glass).
The laser beam outlet 16 or the re-
ception lens 17 are covered.
Wrong reference level set
Obstruction in path of laser beam Laser point must be
The indication remains unchanged or the measuring tool
reacts unexpectedly after pressing a button
Software error
The measuring tool monitors the correct
function for each measurement. When a de-
fect is determined, only the symbol shown
aside flashes in the display. In this case, or
when the above mentioned corrective
measures cannot correct an error, have the
measuring tool checked by an after-sales service agent for
Bosch power tools.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the supplied
protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Bosch Power Tools
Wipe off debris using a moist and soft cloth. Do not use any
Corrective Measure
cleaning agents or solvents.
Maintain the reception lens 17 in particular, with the same
care as required for eye glasses or the lens of a camera.
Check if the plug-in con-
In case of repairs, send in the measuring tool packed in its
nection has been estab-
protective pouch 23.
lished correctly and if
the battery charger is
After-sales Service and Application Service
operating properly.
Our after-sales service responds to your questions concern-
When the unit symbol is
ing maintenance and repair of your product as well as spare
flashing, the battery is
parts. Exploded views and information on spare parts can al-
defective and must be
so be found under:
replaced by a Bosch af-
www.bosch-pt.com
ter-sales service.
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
Only use the original
include the 10-digit article number given on the nameplate of
Bosch charger.
the product.
Great Britain
Cover off the target sur-
Robert Bosch Ltd. (B.S.C.)
face
P.O. Box 98
Make sure that the laser
Broadwater Park
beam outlet 16 or the re-
North Orbital Road
ception lens 17 are un-
Denham
obstructed
Uxbridge
Select reference level
UB 9 5HJ
that corresponds to At www.bosch-pt.co.uk you can order spare parts or arrange
measurement
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
completely on target
surface.
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
Press the measuring
City West
button 2 and the button
Dublin 24
for clearing the internal
Tel. Service: (01) 4666700
memory / On/Off 8 to re-
Fax: (01) 4666888
set the software.
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
English | 27
1 609 92A 1YP | (21.12.15)