Preparation For Installation - DELTACALOR Valet Manual De Usuario

PREPARATION FOR INSTALLATION

Before connecting the heating appliance, disconnect the
power supply using the general switch.
Class II device that can be installed in all the rooms around the
home with exception of volume 1 and 2 of the bathroom (IP20).
The heating appliance must be installed in such a way that the
switches and other control devices cannot be touched by some-
one in the bath or shower (ref. standard NF C15-100).
The heating appliance must not be installed beneath a socket. The
heating appliance must be installed at least 15 cm away from all
obstacles (shelves, curtains, furniture, etc.).
The power circuit of this appliance must include an all-pole circuit
breaking device (ref. standard NF C15-100).
Volume
3
Volume
2
60 cm
60 cm
Volume
1
60 cm
[ 20 - EN ]
15 cm MIN
A
12 cm MIN
B
500 cm MIN
C