Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
for 5 seconds, and the number indicating the
required temperature will stop flashing. The
temperature is now set.
If the AMBIENT COIL is working, the icon
begins to flash.
Mode P1 - P2
From MANUAL MODE, select the
access programmed operation.
'P1' and 'P2' are pre-set programs, whereas
the 'P3' program acts as a freely programma-
ble thermostat timer. 'P1', 'P2' and 'P3' ONLY
have an effect on the AMBIENT coil.
'T1' and 'T2' are reference temperatures pre-
set at 15,5°C and 19°C. 'T1' and 'T2' can be
edited while they are functioning, by selecting
or
. 'T1' and 'T2' can also be set via the
setting menu (see p.27).
'P1' will be the first program that can be se-
lected, 'P2' the second, and 'P3' the third. To
go from 'P1' to 'P2' and from 'P2' to 'P3' select
the
key.
'P1' programming mode
Monday - Friday
19
15,5
T1
T2
T1
Saturday - Sunday
19
15,5
T1
key to
T2
T2
[ 26 - EN ]
'P2' programming mode
Monday - Friday
19
15,5
T1
T2
T1
Saturday - Sunday
19
15,5
T1
'P3' Mode
When in 'P3' programming mode, keep your
finger on the
key for more than five sec-
onds to access hour-by-hour programming.
Day-by-day programming can also be done
using the
and
'T1' or 'T2'.
The 'P3' icon begins to flash, and 'h00' appears
on the screen, while in the day column the
'1' icon switches on. Use the
to select whether the radiator is to work at
temperature 'T1' or 'T2' at the time and on
the day indicated on the screen (in the exam-
ple shown, from 18:00 to 19:00 on Wednes-
day, the radiator will work at temperature
'T1'). The
key can be used to do weekly
programming. Once all the times for all the
days have been selected, the radiator goes
back to operating according to the modified
'P3' mode.
T2
T1
T2
T2
keys for temperatures
and
keys
Publicidad
Tabla de contenido
