DELTACALOR Valet Manual De Usuario página 29

3. Menù 'OFS'
The OFFSET MENU can use used to correct
the radiator's ambient temperature reading,
to adapt it to the real ambient temperature.
This correction can be done by entering a
factor of ±5°C in relation to that detected.
To go to another function, use the
keys.
The temperature can be adjusted using the
or keys.
4. Menù 'tP'
The 'tP' menu can be used to regulate the T1,
T2 and ANTI-ICE temperatures. To go to an-
other function, use the
When the icon is on and the tempera-
ture selection area is flashing, use the
or
or keys.
or
[ 29 - EN ]
keys, to select the required temperature.
Then push the key to proceed with setting
the temperature, or wait 5 seconds to exit
the menu automatically.
The default setting for the
15,5°C.
When the icon is on and the tempera-
ture selection area is flashing, use the
keys, to select the required temperature.
Then push the key to proceed with setting
the temperature, or wait 5 seconds to exit
the menu automatically.
The default setting for the
19,0°C.
When the icon is on and the tempera-
ture selection area is flashing, use the
keys, to select the required temperature.
Then push the key to proceed with setting
the temperature, or wait 5 seconds to exit
the menu automatically.
The default setting for the
7,0°C.
5. 'rStF' Menu
Select the 'rStF' menu to reinstate the default
settings, which will take all the radiator's tem-
peratures to those set by Deltacalor. To go to
the next function, use the
From the 'rStF' screen, select the menu icon
and the 'rStF' indication begins to flash, for
temperature is
or
temperature is
or
temperature is
or keys.