Publicidad
Idiomas disponibles
Idiomas disponibles
More about "Alarm" legend indication
Alarm Status: indicates if the booster has enough isolation between outdoor and indoor
antennas in order to avoid loop back or so-called self-oscillation. HiBoost is an ideal
mechanism. Smart AGC, to avoid interference with operator mobile networks. "Alarm" long-
team up on LCD display means not only device is powering on, but also ISO function is
working great and self-oscillation has been eliminated.
LED
Status
Green
Slow Flashing
Green (Per 2.5S
off, 0.5S on)
Quick Flashing
Green (Per 0.5S
off, 0.5S on)
Alarm LED
Red
OFF
More about "NET" legend indication
NET indicates the connection establishment between booster and Bluetooth/Wi-Fi, if the connection
established well, NET LED will show Green UP status, otherwise light would be blinking or off.
LCD
Status
Green Light up
NET
status
Light off
Meaning
No loop back or no self-
oscillation
Slight loop back or self—
oscillation (1dB≤ISO
≤14dB)
Attenuation
Deep loop back or self—
oscillation (15dB≤ISO
Attenuation
<42dB)
The booster sub-band auto shuts
off for protection due to severe
loop back or self-oscillation
(ALC≥42dB,ISO≥42dB)
The booster not power up
Meaning
Mobile is connected to booster
through Bluetooth/Wi-Fi
Mobile is not connected to booster
through Bluetooth/Wi-Fi
Solution
NO action is needed.
NO action is needed.
Not working properly.
Check if there would be self-
oscillation message and Sub-band
interface. Please check the
Troubleshooting section to get a
solution if coverage is not good.
Not working properly. Please
check the Troubleshooting section
to get a solution.
Solution Methods
Working properly.
Not working properly, please
contact with Huaptec EU for
assistance.
15 / 19
Publicidad
