Descargar Imprimir esta página

HiBoost Hi20-3S-Plus Manual De Usuario página 37

Ocultar thumbs Ver también para Hi20-3S-Plus:

Publicidad

Idiomas disponibles

Idiomas disponibles

If the signal in a small section of the building hasn't been improved, try the following:
Check to see if the indoor antenna is installed correctly. Try moving the antenna to
improve coverage.
Try adjusting the direction the indoor antenna is pointing.
Remark:
When increasing the downlink gain, make sure the isolation is adequate to prevent system
oscillation
Note: The Alarm LED long-term Green up and the problems of self-oscillation and strong
downlink signals are fixed. In most cases, there is no need to take any additional measures
except for deep self-oscillation or excessively strong signals from the tower. The self-adaptive
ALC and isolation gain processing system automatically solve most problems.
17 / 19

Publicidad

loading

Este manual también es adecuado para:

Hi20-5s-plusHi20-6s-plus, hi23-3s-plusHi23-5splusHi23-6s-plus