Maguisa ET-600 Instrucciones De Instalación Y Guía De Usuario página 32

Technical specifications.
Power Input :
Motor:
Light time:
Working temperature:
Relative Humidity:
Open and close force
Reception frequency:
Sensitivity:
Decoding:
Transmitter power:
Lamp:
Final notes.
This manual is only used by technical persons who are qualified to carry out the installation.
It is important for the installer to show their clients correct operation using of the opener including the using of
manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a
regular check of the safety and reversing devices.
Important information for the user.
Once the opener has been installed, the user must be informed about how it works and all the risks that can
arise if it is used improperly. The user must avoid placing himself/herself in dangerous situations such as
standing within the door's operating range when it is moving.
let children play near the door, and keep the remote controls out of their reach.
Do not
All services, repairs or checks must be carried out by professionally qualified persons, and noted on a
maintenance register kept by the user.
In the case of a malfunction the user must call an authorized installer and should not
IMPORTANT NOTE:
attempt to repair it by yourself.
220 VAC ±10% 50Hz
24V DC
ET-600 à 40 W.
ET-1000 à 50 W.
3 minutes
-20° ~ 70°C
<90%
: ET-600 600N
ET-1000 1000N
433.92MHz
>1 V for correct receiver signal
(average range 50m, with an aerial)
Rolling code
23A 12V Battery
230V 25W
32