Publicidad
Idiomas disponibles
Idiomas disponibles
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against HOLZMANN MASCHINEN GmbH.
12.2 User requirements
The machine is designed to be operated by one person. The prerequisites for operating the
machine are physical and mental fitness as well as knowledge and understanding of the operating
instructions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack
of knowledge, are unable to operate the machine safely must not use the machine without
supervision or instruction by a responsible person.
Basic knowledge of woodworking especially the knowledge of the relationship between wood, tools,
saw blade, cutting speeds and rotational speeds.
Please note that locally applicable laws and regulations determine the minimum age of the operator
and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified electrician or
under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
12.3 Safety devices
The machine is equipped with the following safety devices:
12.4 General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
•
Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have
are fitted.
Make sure that the guards are in good working order and properly maintained.
•
•
Select a level, vibration-free surface as the installation area.
•
Ensure sufficient space around the machine.
Ensure that the machine is on a firm footing.
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
•
Ensure a clean working environment.
Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
•
parts, etc.).
Only use tools that are in perfect condition and free of cracks and other defects (e.g.
•
deformations).
Remove tool keys and other setting tools before switching on the machine.
•
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorized restarting.
•
The machine may only be operated, maintained or repaired by persons who are familiar
and who have been informed about the dangers arising from this work.
•
Ensure that unauthorized persons keep a safety distance from the machine and keep
children away from the machine.
Always work with care and the necessary caution and never use excessive force.
•
•
Do not overload the machine.
Hide long hair under hair protection.
•
Wear close fitting protective work clothing and suitable protective equipment (eye
•
protection, dust mask, ear protection, safety-shoes, and work gloves only when handling
tools).
HOLZMANN Maschinen GmbH
Safety guard : Saw blade guard (1), to cover the saw unit.
www.holzmann-maschinen.at
SAFETY
30
VPS3216ECO_230V
Publicidad
