Descargar Imprimir esta página

Dalbach KS88-F Instrucciones De Uso Y De Montaje página 32

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
Putting into operation
11 Putting into operation
Clean the appliance and the interior parts thoroughly before putting into operation (see
chapter "Service and Maintenance").
Set the temperature according to the ambient temperature at the installation
location if the equipment is changed or if the appliance door is opened and closed
frequently.
With very high summer temperatures, set the temperature regulator to a higher
level to maintain the desired cooling temperature.
For optimum energy consumption, leave the glass shelves/drawers in the
appliance as shown (see section Proper storage of food).
The freezer compartment is ready for use after about 3 hours.
11.1 Switching the appliance ON/OFF
1. Connect the appliance to the mains power supply.
→ When the appliance door is opened, the interior light comes on.
2. To switch on the appliance, turn the temperature regulator from "0" to the right
to the desired cooling temperature. The temperature regulator is located on the
right-hand side in the interior of the appliance.
3. To switch off the appliance, turn the temperature regulator to position "0".
APPLIANCE DAMAGE!
Do not switch on the appliance immediately after a power interruption. Possible overload
of the compressor or fuse blows.
Setting the temperature
The temperature depends on certain factors, such as the place of installation, how often
the appliance door is opened and closed or how the appliance is loaded.
1. Adjust the internal temperature of the appliance with the rotary
knob.
2. When switching on for the first time, turn the temperature
regulator to the highest setting.
→ The appliance reaches its normal working temperature after
approx. 2 hour and is then ready for operation.
3. Turn the temperature regulator back to a medium setting.
Page | 32

Publicidad

loading