HTW MKG Serie Manual De Usuario E Instalacion página 52

MODE: Pressing selects the operating mode in the following sequence.
E Heating mode is not active for cooling only units.
VELOCIDAD VENTILADOR Pressing this button selects the fan speed in the following sequence:
Adjust Reduces the set temperature.
If pressed, the temperature is reduced from 1ºC to 1ºC for 0.5s.
Adjust Set temperature increases
If pressed, the temperature is increased from 1ºC to 1ºC for 0.5s.
deflector rotates 6º. For normal operation and optimal cooling and heating effect, the eflector
does not rotate to the degree it is in when the unit is turned off (only available when the remote
control is used with the corresponding unit).
Vertical air oscillation: Activate or deactivate the vertical air oscillation function (only available
when the remote control is used with the corresponding unit).
Horizontal air oscillation: Activate or deactivate the horizontal air oscillation function (only
available when the remote control is used with the corresponding unit).
Displays the current time (12:00 appears when resetting or powering on for the first
time). Press CLOCK for 5s; the icon indicating the time will flash with 0.5s. Press it again: the
icon indicating the minutes will flash with 0.5s.
setting or modification will take effect only when pressing the OK button to confirm.
BUTTONS AND FUNCTIONS
3
¡ ¡
LOW
¡
Oscillation del of the air deflector. When pressing the button, the air
¡ ¡
¡ ¡
and are used to adjust the number. The