HTW MKG Serie Manual De Usuario E Instalacion página 55

Press FAN SPEED to view the current fan speed. Possible speeds are: AUTO
(automatic), LOW (low), MED (medium) and HIGH (high). The preset value is high for units without
average fan speed.
ECO function: this icon lights up when the ECO button is pressed.
NOTE: The above icons are displayed when the remote control is turned on for the first
time or is reset.
INSTRUCTIONS FOR USE
Battery installation and replacement
Install 2 pieces of # 7 alkaline batteries.
Slide the cover to insert the batteries and be sure to install them with the correct polarity.
Automatic operation
1. Press MODE to select AUTO.
2. Adjust the temperature with and . Generally the range is from 17ºC to 30ºC.
3. When pressing ON / OFF the operation indicator light on the indoor unit lights up. The air conditioner
will operate in AUTO mode and the fan speed in that mode is not adjustable.
4. The automatic operation corresponds to the ECO function.
COOLING/HEATING/FAN
1. ress E to select between COOLING HEATING r FAN
2. Adjust the temperature with
3. Press FAN SPEED to select between AUTO, LOW, MED or HIGH.
4. When pressing ON / OFF, the operation indicator light on the indoor unit lights up. The air conditioner
will operate in the configured mode. Stop operation with ON / OFF.
and . Generally the range is from 17ºC to 30ºC.
INSTRUCTIONS FOR USE
6