HTW MKG Serie Manual De Usuario E Instalacion página 54

INDICATORS AND FUNCTIONS
Temperature
Transmission
screen
Operating
mode
ECO function
e Shows the set temperature. Adjust the temperature with
be displayed in this area if the unit is in FAN mode.
Transmission screen The icon blinks once when the remote control sends the signal.
The icon is displayed when the remote control is turned on or off.
Operating mode Press MODE to view the current operating mode. Possible speeds are: AUTO,
COOL, DRY, HEAT and FAN (HEAT function will not be active for cooling only units).
OUR The currently configured time is displayed. Press CLOCK for 5s; the icon indicating the
time will blink. Press this button again; the icon indicating the minutes will flash.
to adjust the number. The setting or modification will take effect only when pressing the OK button
to confirm.
LOCK The icon lights up when you press the LOCK button.
In the locked state, all buttons are disabled except the LOCK button.
Timer on / off: In the timer on state, the ON icon lights up and in the same way for the timer off
state. When setting the timer on and off simultaneously, the ON and OFF icons are displayed.
1
2
4
SE
K
SE
8
INDICATORS AND FUNCTIONS
SPEE
Table 2
3
Hour
Lock
6
Timer on/off
7
Fan speed
9
and . No value will
and are used