HTW MKG Serie Manual De Usuario E Instalacion página 53

To set the timer on.
If this button is pressed, the time will be increased from half an hour to half an hour. After
advancing to more than 10 hours, if you keep pressing the button, the hour will increase
from hour to hour. Setting the number to 0:00 cancels the timer on setting.
To set the timer off.
If this button is pressed, the time will be increased from half an hour to half an hour. After
advancing to more than 10 hours, if you keep pressing the button, the hour will increase
from hour to hour. Setting the number to 0:00 cancels the timer off setting.
ndoor Press this button with a 1mm needle to cancel the current setting and
reset the remote control.
door Press this button with a 1mm needle to lock or unlock the current setting.
Used to confirm settings and time modification.
door Press this button with a 1mm needle to switch between cooling and
cooling / heating functions. During setup, the backlight will turn on. The default value is COOL
and HEAT.
Turns the Eco function on or off. It is recommended to turn this function on at night
time (only available when the remote control is used with the corresponding unit).
BUTTONS AND FUNCTIONS
4