Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operation
Other UPS Features (Rear Panel)
AC Receptacles: Your UPS features 15/20- and 20- or 30-amp AC outlets.
These output receptacles provide your connected equipment with AC line
power during normal operation and battery power during blackouts and
brownouts. The UPS protects equipment connected to these receptacles against
damaging surges and line noise.
15/20 amp/120V
NEMA 5-20R
20 amp/120V
NEMA L5-20R
30 amp/120V
NEMA L5-30R
Communications Ports (USB or RS-232): These ports connect your UPS to a
workstation or server. Use with Tripp Lite's PowerAlert Software and included
cables to enable your computer to automatically save open files and shut down
equipment during a blackout. Also use PowerAlert Software to monitor a wide
variety of AC line power and UPS operating conditions. Consult your
PowerAlert Software manual or contact Tripp Lite Customer Support for more
information. See "USB and RS-232 Serial Communications" in the "Optional
Installation" section for installation instructions.
EPO (Emergency Power Off) Port: Your UPS features a EPO port that may
be used to connect the UPS to a contact closure switch to enable emergency
inverter shutdown. See Optional Installation.
Accessory Slot: Remove the small cover panel from this slot to install optional
accessories to remotely monitor and control your UPS. Refer to your accessory's
manual for installation instructions. Contact Tripp Lite Customer Support at
(773) 869-1234 for more information, including a list of available SNMP, network
management and connectivity products.
continued
7
Publicidad
