Publicidad
Idiomas disponibles
Idiomas disponibles
Other Features
Set Clock
1. Press the Settings button and turn
the dial to select Clock Set. Press
the dial to enter..
2. Turn the dial to set hours. Press the
dial to enter.
3. Turn the dial to set minutes. Press the
dial to enter.
4. Turn the dial to set AM/PM. Press the
dial to enter.
Clock Mode
Clock Mode can be set for 12 hours and 24 hours.
1. Press the Settings button and turn the dial to select
Clock Mode. Press the dial to enter.
2. Turn the dial to set 12 hours or 24 hours Clock
Mode. Press enter to activate.
Display Speed
Display Speed can be adjusted for Slow, Normal, or
Fast
1. Press the Settings button and turn the dial to select
Display Speed. Press the dial to enter.
2. Turn the dial to set Display Speed (Slow, Normal,
Fast). Press enter to activate.
Sound Level
Sound Level can be adjusted for Mute, Low, Normal
or Loud.
1. Press the Settings button and turn the dial to select
Sound Level. Press the dial to enter.
2. Turn the dial to set Sound Level (Mute, Low, Normal,
or Loud). Press enter to activate.
Surface Light Sync
1. Press the Settings button and turn the dial to select
Surface Light Sync. Press the dial to enter.
Filter Replace Reminder
The charcoal/grease filter should be
replaced when it is noticeably dirty /
depending on hood usage) or filter
replacement LED is on.
When the Filter Replace LED turned
on, replace filter and press Reset Filter
Vent Fan
The vent fan removes steam and other
vapors from surface cooking.
Press Vent Fan once for high fan
speed, twice for medium fan speed,
three times for low fan speed or a
fourth time to turn the fan off.
Vent fan will turn on automatically when the cooktop
burner is turned on with Chef Connection.
24
2. Turn the dial to select Sync Mode (Off, Low, High).
3. Press the dial to activate.
Vent Fan Sync
1. Press the Settings button and turn the dial to select
Vent Fan Sync. Press the dial to enter.
2. Turn the dial to select Vent Fan Sync Mode (Off,
Low, Medium, High or Boost).
3. Press the dial to activate.
Sync Auto Off
1. Press the Settings button and turn the dial to select
Sync Auto Off Press the dial to enter.
2. Turn the dial to select Sync Auto Off (up to 15
minutes and manual). Press enter to activate.
My Cycle
The Add 30 Sec button can be adjusted to the My Cycle
feature.
1. Press Setting button and turn the dial to select
MyCycle.Press the dial to enter.
2. Turn the dial to select time (from 5 Sec to 60 Sec) and
press the dial to complete the setting.
Convect Bake Offset
1. Press the settings button and turn the dial to select
Convect Bake Offset. Press the dial to enter.
2. Turn the dial to select Convect Bake Offset On/Off.
Press enter to activate.
Bake Temp Adjust
1. Press the settings button and turn the dial to select
Bake Temp Adjust. Press the dial to enter.
2. Turn the dial to select Bake Temp Adjust range from
Surface Light
Press Surface Light once for bright
light, twice for the night light or a third
time to turn the light off.
Automatic Fan
An automatic fan feature protects the microwave from
too much heat rising from the cooktop below it. It
automatically turns on if it senses too much heat.
If you have turned the fan on you may find that you
cannot turn it off. The fan will automatically turn off when
the internal parts are cool. It may stay on for 30 minutes
or more after the cooktop and microwave controls are
turned off.
49-7000158 Rev. 2
Publicidad
