Gaggia Milano RI8437 Manual Del Usuario página 11

9 Place a container under the filter holder (Fig. 13).
10 Turn the selection knob to the coffee position (Fig. 8).
-
Let the machine dispense water until the water tank is empty.
11 When the water tank is empty, turn the selection knob back to the standby position (Fig. 9).
12 Fill the water tank with fresh water up to the MAX indication and wait until the 'machine ready' light
lights up.
13 Turn the filter holder from right to left to remove it from the brew unit and rinse it with fresh water
(Fig. 14).
The machine is ready for use.
Using the machine
Note: Clean the coffee pod filter and coffee pod adapter every time you have used it.
Brewing coffee with ground coffee
Warning: To prevent the risk of burns, do not turn the pressurized filter holder to remove
it during brewing.
1 Preheat the pressurized filter holder before the first coffee brewing.
2 Insert the filter holder into the brew unit from below (Fig. 11).
3 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will jump back to the left slightly.
4 Turn the selection knob to the coffee position until some water flows out of the coffee dispensing
openings (Fig. 8).
5 Brew one cup of water. Turn the selection knob to the standby position to stop brewing (Fig. 9).
6 Turn the filter holder from right to left to remove it from the machine and pour out the remaining
water (Fig. 15).
Note: Remove any coffee residues from the rim of the filter holder.
7 Use the measuring scoop to put the ground coffee into the pressurized filter holder.
-
To brew one cup of coffee, add 1-1.5 measuring scoops of ground coffee.
-
To brew two cups of coffee, add 2 measuring scoops of ground coffee (Fig. 16).
Note: The pressurized filter holder automatically tamps the ground coffee. There is no need to
tamp the ground coffee yourself.
8 Insert the ground coffee filter into the pressurized filter holder (Fig. 17).
Note: When you use the machine for the first time, the ground coffee filter is already inserted.
9 Insert the filter holder into the brew unit.
10 Turn the filter holder from left to right until it locks into place and release the filter holder grip (Fig.
12). The handle will jump back to the left slightly.
11 Place one or two cups under the pressurized filter holder (Fig. 18).
Note: Make sure the cups are placed correctly under the coffee dispensing openings.
12 Turn the selection knob to the coffee position.
-
The machine starts brewing coffee.
13 Turn the selection knob to the standby position when the cup(s) contain(s) the desired amount of
coffee.
14 Remove the pressurized filter holder and empty it. Clean the pressurized filter under a running tap.
English
11