Qilive Q.1857 Manual Del Usuario página 8

control and the IR sensor.
EN
- The maximum effective range of the remote control is 6 meters in the 40-degree angular range
of direction. The operation range may vary depending on the ambient brightness.
Control music playback
• Play to start, pause or resume play.
• Press / to adjust volume.
• Press / to select the previous or next track.
Select a sound mode
During music playback, you can press a sound mode button (FLAT, POP, JAZZ or ROCK) on the
remote control to select a predefined sound mode to suit your music or video.
Play audio from Bluetooth
Before you can listen to audio files stored on your Bluetooth device (e.g. a smartphone or tablet)
through the speakers of the soundbar for the first time, pair the soundbar with your Bluetooth device.
1. Turn on the soundbar.
2. Press the MODE button on the soundbar (or
Bluetooth mode. The LED on the soundbar turns blue and flashes.
3. On the Bluetooth device, activate Bluetooth and search for Bluetooth devices that can be paired
(refer to the user manual of the device for details).
4. Then select "600089330" on your Bluetooth device to pair. When the soundbar is paired with
your Bluetooth device, the LED on the soundbar turns to solid blue from flashing.
5. Select and play audio files on your Bluetooth device. Audio streams from your Bluetooth device
to the soundbar. Use the buttons on the remote control to control playback.
• Once paired successfully, the soundbar will automatically reconnect to the paired device each
time the two are turned on.
• To disconnect Bluetooth connection, press and hold
To reconnect Bluetooth connection, exit and re-enter Bluetooth mode.
Notes:
- The maximum operational range between the soundbar and a Bluetooth device is approximately
10 meters (30 feet).
- The music streaming may be interrupted by obstacles between your Bluetooth device and the
soundbar such as wall, metallic casing that covers the device, or other devices nearby that
operate in the same frequency.
Play audio from USB
The soundbar supports playback of MP3 files stored on a USB device.
1. Connect your USB device to the USB port on the back of the soundbar.
2. Press the MODE button on the soundbar (or
USB mode. When USB mode is selected, the LED on the soundbar turns cyan.
3. Playback starts automatically. If not, press
Listen to an external device
You can listen to an external device (such as MP3 player) through the speakers of the unit.
1. Using the supplied audio cable, connect the AUX jack (3.5 mm) on the soundbar to the
headphones jack on an MP3 player or other external device.
2. Press the MODE button on the soundbar (or the AUX button on the remote control) to switch
the soundbar to AUX source. When AUX source is select, the LED on the soundbar turns green.
3. Select and play audio files on the external device.
Note:
- During playback in AUX mode, you cannot use the remote control of the soundbar to select the
previous/next track or pause/resume play.
Replacement of remote control battery
on the remote control) to switch the soundbar to
on the remote control for three seconds.
on the remote control) to switch the soundbar to
on the remote control.
8