Publicidad
Idiomas disponibles
Idiomas disponibles
EP-44SIP(H) WEBSERVER
3.3.2.2. Relay 1 / Relay 2
Defines how relay 1 and relay 2 operate.
Relay 1 Function: It defines whether relay 1 works in DTMF Activation mode or Status Indication
mode.
In DTMF Activation mode, relay will activate if you send a DTMF key during the call and match with
the preset key (by default).
In Status Indication mode, relay will be activated according to the status of the call (Ringing /
Talking / Talking & Ringing).
Indicator: You can select in which call status relay is activated: Ringing, Talking or Talking & Ringing.
Remote Trigger Key: To choose a key to trigger the relay 1 during a call. The key could be 0~9, *, #.
Triggering Duration: Sets the activation time for the relay triggering. The time could be from 1 to 99
seconds.
Relay 2 Function: It defines whether relay 2 works in DTMF Activation mode or Status Indication
mode.
In DTMF Activation mode, relay will activate if you send a DTMF key during the call and match with
the preset key.
In Status Indication mode, relay will be activated according to the status of the call (Ringing /
Talking / Talking & Ringing (by default)).
Indicator: You can select in which call status relay is activated: Ringing, Talking or Talking & Ringing.
Remote Trigger Key: To choose a key to trigger the relay 2 during a call. The key could be 0~9, *, #.
Triggering Duration: Sets the activation time for the relay triggering. The time could be from 1 to 99
seconds.
Configure Relay Settings and then click Submit.
EP-44SIPx_Webserver_Manual_ENG_v2.0
Page 18 of 47
Publicidad
