Publicidad
Idiomas disponibles
Idiomas disponibles
EP-44SIP(H) WEBSERVER
3.3.7. LED & Key
Defines the behaviour of the led depending on the status of device and simulate the key press.
There are a total six options for each state: Not Set, Set Low, Set High, Flash Fast, Flash and Flash
Slow.
Default: Default state.
On no IP address: Defines the state when there is no IP assigned to the device.
On unregistered: Defines the state when the device has not been registered to a Proxy server.
On idle: When the device is idle (not in a call).
On Using: The device is being used (in a call‐communication).
On Ringing: The device is ringing/calling (call in process but communication not established).
On Call connected: The system has established a call.
Check Key: Activate remotely as the button has been pressed.
Configure the LED & Key parameters and then click Click and then Submit.
EP-44SIPx_Webserver_Manual_ENG_v2.0
Page 34 of 47
Publicidad
