Publicidad
Idiomas disponibles
Idiomas disponibles
Cable Tie
(for the Drain hose1)
Nut connector & seal
Kick Plate
(for ¾" 90° fi tting)
⅜"
For the hot water supply line – We strongly recommend using ⅜" minimum O.D. copper tubing with
a compression fitting or a flexible stainless steel braided hot water supply line.
Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside the tube
fitting.
You also need a 90° Fitting with ¾" N.P.T. external pipe threads on one end and a fitting sized to fit
your hot water supply line (copper tubing/compression fitting or braided hose) on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some local codes
may require the cable to have a BX style metal jacket.
Publicidad
