Publicidad
Idiomas disponibles
Idiomas disponibles
fore and after use.
• Avoid water contacting the electrical components.
• Clean the inside of container with a non-abrasive detergent
and rinse with clean water.
• Never immerse the appliance in water or other liquids.
• No parts are dishwasher safe.
Recommended cleaning procedure:
Parts
How to clean
Bowl
Using a sponge or
damp cloth with
mild soap and water,
rinse, sanitize and dry
thoroughly.
Attachments
Hand wash using
(Dough hook,
mild soap and water,
beater and
rinse, sanitize and dry
whisk)
thoroughly.
Bowl guard
Hand wash using a
sponge or damp cloth
with mild soap and
water, rinse, sanitize
and dry thoroughly.
Outer surface
Wipe with a clean
damp cloth using
soap and water, rinse,
sanitize and dry. Do not
use water jet.
Planetary
Wipe with a clean
Shaft
damp cloth using
soap and water, rinse,
sanitize and dry.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
• Special care must be taken when moving or transporting the
machine due to its heavy weight. With at least 2 persons or
using a cart. Move the machine slowly, carefully, and never
incline more than 45°.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems
Frequency
Machine do not
Clean after each use
start running
Clean after each use
Machine stops
during operation
Clean after each use
Twice a week
Clean after each use
Machine sound
too noisy
Attachments
cannot install
onto the plane-
tary shaft easily
Lift up / Lower
bowl lever not
operation easily
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Possible causes
Possible solution
Bowl guard is not
Rotate the bowl guard
in properly closed
to the right until fully
position.
closed properly.
Bowl is not raised
Raise the bowl to the
to the proper
correct position by
location.
using the level.
The power plug
Check to make sure
is not connected
the power plug is
properly.
connected properly.
Internal overload
Press OFF the button
activates to prevent
and then press RESET
overheat.
button at the back.
Damage or broken
Contact the supplier.
transmission belt
Machine is not
Adjust the surface
placed on a hori-
or move to another
zontal surface.
horizontal surface.
Make sure the bowl is
Bowl is not placed
placed into the bowl
correctly.
cradle correctly with
the guided pins.
Remove and install
Attachments not
the attachments into
fitted properly.
position again.
Reduce ingredients
Bowl is overloaded.
capacity.
Damaged or worn
transmission belt.
Contact the supplier.
Planetary gear
needs lack of
lubricant.
Wipe planetary shaft
Lack of lubricant
with a clean damp
and / or cleaning of
cloth and lubricate
the planetary shaft
the shaft with mineral
required.
oil or grease.
Lubricate bowl slides
Lack of lubricant
with mineral oil or
on the bowl slides.
grease.
GB
15
Publicidad
