Sony SDM-X95 Serie Manual De Instrucciones página 39

Items
0 MODE RESET
Options Features
OK You can reset BACKLIGHT,
CONTRAST, BRIGHTNESS,
GAMMA, COLOR, and SHARPNESS
to the default setting.
CANCEL To cancel resetting and return to the
menu.
SCREEN menu (analog RGB
signal only)
x Automatic picture quality adjustment
function
When the display receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch). This ensures that a clear
picture appears on the screen (page 16).
Note
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch is operable.
If the automatic picture quality adjustment function of
this display did not seem to adjust the picture
completely
You can make further automatic adjustment of the picture quality
for the current input signal. (See AUTO below.)
If you still need to make subtle adjustments to your
picture quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives the same input signal. These
settings may have to be repeated if you change the input signal
after reconnecting your computer.
Items Features
AUTO Make the appropriate adjustments of the
screen's phase, pitch and horizontal/
vertical position for the current input
signal and save them.
x Adjust the picture's sharpness and position
manually (PHASE/PITCH/H CENTER/V CENTER)
You can adjust the picture's sharpness and position as follows.
1
Set the resolution to 1280 × 1024, on the computer.
2
Load the CD-ROM.
3
Start the CD-ROM and display the test pattern.
For Windows User
When Auto run operates:
1 Click "DISPLAY ADJUSTMENT TOOL (UTILITY)."
2 Click "Adjust" and confirm the resolution and then click
"Next".
Test pattern for PITCH, PHASE, H CENTER and V
CENTER appears in order.
When Auto run fails to operate:
1 Open "My Computer" and right click the CD-ROM icon.
Go to "Explorer" and open the CD-ROM icon.
2 Open [Utility] and then select [Windows].
3 Start [Win_Utility.exe].
Test pattern appears.
For Macintosh user
1 Open [Utility] and then select [Mac].
2 Start [Mac_Utility.exe]
Test pattern appears.
Press the m/M buttons
Items
PHASE Minimize the horizontal stripes on the
screen.
PITCH Vertical stripes become vanished.
H CENTER Adjust the picture position when your
picture does not appear on the center of
V CENTER
the screen.
MENU POSITION menu
Press the m/M buttons
Items
MENU POSITION You can change the menu displayed
position on the screen. You can choose
one of 9 positions.
INPUT SENSING menu
Those models of digital input search any input signals. You can
switch the signals back and forth automatically.
Items Features
AUTO ON When the selected input has no signal, or
when you select an input with the OK
button and if it has no input signal, an
on-screen message appears (page 18).
Then the display checks the input signal
and switch to other input automatically.
When an input is changed, the selected
input is displayed on the upper left
corner of the screen.
When there still is no input signal, the
display goes into the power saving mode.
INPUT 1 When turning on the display, INPUT1 or
INPUT2 will be displayed as priority
setting (INPUT SENSING will not
INPUT 2
function).
AUTO OFF The input is not changed automatically.
Press the OK button to change the input.
15
GB