Descargar Imprimir esta página

Sony Trinitron CPD-G420S Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3
Move the control button up or down to highlight 6
or
. Then press the control button.
4
Move the control button up or down to adjust the
contrast (6) or brightness (
control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE (
OPTION (
) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
You cannot adjust the contrast (6) or brightness (
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE (
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 14.
Downloaded from:
https://www.usersmanualguide.com/
). Then press the
CONTRAST
/
BR GHT
I
s
RGB
:
/
EX I T :
MENU
) on this
) of the OPTION (
) menu.
Adjusting the centering of the
picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
.
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
horizontal adjustment, or
Then press the control button.
4
Move the control button up or down to adjust the
centering.
Adjusting the size of the picture
(SIZE/CENTER)
) of the
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
horizontal adjustment, or
adjustment. Then press the control button.
4
Move the control button up or down to adjust the
size.
for
for vertical adjustment.
for
for vertical
11
US

Publicidad

loading