Descargar Imprimir esta página

Peavey PBK12P Instrucciones Importantes Para Su Seguridad página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
USB CONTROL PANEL (14)
Controls the playback of MP3 files through the USB port
DISPLAY (15)
Digital display for USB MP3 functions
USB PORT (16)
For connection of a USB thumb drive for MP3 file playback.
DO NOT PLUG A USB CABLE FROM A COMPUTER INTO THIS PORT!
The PBK12
USB MP3 input, and/or the computer USB output can be damaged as a result.
s p e c i F i c A t i o n s
Frequency Range, 1 m on-axis, swept-sine in 1/2 Space environment, +/- 6dB:
66 Hz to 20 kHz
Nominal sensitivity (1W @1m, swept sine input in anechoic environment):
97 dB (average)
Maximum Sound Pressure Level (1 meter):
122 dB SPL peak with music
Transducer Complement:
Heavy-duty 12" woofer
14Ti
1.4" titanium diaphragm dynamic compression driver, mounted on a semi-exponential horn.
Nominal Coverage Pattern:
60 degrees horizontal by 45 degrees vertical
Electroacoustic crossover frequency:
2,800 Hz
Crossover type:
Internal passive two-way crossover with driver EQ, and level matching,
Crossover Slopes:
12 dB/octave (2nd order) low pass, 12dB/octave (2nd order) high pass, both with staggered poles and driver EQ.
Input Connections:
Line Level: One female XLR providing balanced line-level operation, and a pair of RCA phono jacks.
Mic Level: One female XLR and one 1/4" phone jack
USB Input Port: For connection of a USB thumb drive/memory stick for playback of MP3 music files.
DO NOT PLUG A USB CABLE FROM A COMPUTER INTO THIS PORT!
The PBK12P USB MP3 input, and/or the computer USB output can be damaged as a result.
Output Connections:
One male XLR and one 1/4" phone jack. The Line Out jacks are intended for the use of linking multiple PBK12P
in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range
version of the input signal.
Enclosure Materials & Finish:
Black ABS plastic with textured surface, black powder-coated perforated grille.
Mounting or Suspension: Molded-in 1 3/8" pole-mount cup for stand mounting, four rubber feet for floor use.
NOTE: This unit is not designed for overhead suspension!

Publicidad

loading