Peavey PBK12P Instrucciones Importantes Para Su Seguridad página 25

Idiomas disponibles

Overall Dimensions (H x W x D):

23.23" x 14.57" x 12.60"

(590mm x 370mm x 320mm)

Net Weight:

33 Lbs. (15.0 kg)

electronics AnD AMpliFier speciFicAtions:

Internal power amplifier (@120 VAC line):

450 watts peak available power

Continuous Power: 225 watts @ less than 3% THD

Electronic Input Impedance (Nominal):

Line: 22 k ohms balanced (XLR), 10 k ohms unbalanced RCA

Mic: 2.2 k ohms balanced (XLR) No phantom power available.

Input Sensitivity for Full Output (Level full CW):

Line Level – 0.36 V RMS

Mic Level – 0.02 V RMS

Tone Control Corner & Range:

Bass: +/- 12 dB, corner @ 550 Hz, Treble: +/- 12 dB, corner @ 1.0 kHz

Nominal Amplifier Frequency Response (before EQ):

+1, -3 dB from 20 Hz to 20 kHz

Hum and Noise:

Greater than 90 dB below rated power

THD and IM:

Typically less than 1 %

Power requirements of Peavey PBK12P

™

System:

Nominal 130 Watts, 100-120 VAC 50-60 Hz

Fuse Type:

For 110-120 VAC USE: International fuse classification T3.15A cartridge-style 5 x 20 mm size fuses with a 250V

rating can be used.

For 220-240VAC USE: International fuse classification T2.0A . This is a cartridge style 5 x 20 mm size time-delay

fuse with a 2.0 amp 250V rating.

Features and specifications are subject to change without notice.

Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305