cecotec BOLERO FLUX TM 603500 INOX A Manual De Instrucciones página 50

ENGLISH
The kitchen hood
vibrates
The kitchen hood
is not sufficiently
extracting
The kitchen hood
is tilted
If none of these situations match your problem, do not attempt to disassemble, or repair the
appliance by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried
out by an authorised technician, and you must use only original spare parts.
Unauthorised self-maintenance or maintenance will affect the safe use of the product and the
application of the warranty policy.
NOTE:
Any electrical repairs to this appliance must conform to local and/or state laws. Please contact
the official Cecotec Technical Support Service in case of doubt and before carrying out any of
the above operations. Always disconnect the device from the power supply when opening it.
7. TECHNICAL SPECIFICATIONS
Product reference: 02876 / 02877
Product name: Flux TM 603500 Inox A / Flux TM 703500 Inox A
Rated voltage: 220-240 V~
50
BOLERO FLUX TM 603500 INOX A
BOLERO FLUX TM 703500 INOX A
The fan is damaged, causing
the kitchen hood to vibrate
when extracting air.
The engine is not securely
fastened.
The kitchen hood is not
securely fastened.
The distance between
the kitchen hood and the
cooking surface is too large.
There is too much ventilation
in the room due to open
doors or windows.
Fastening screws are not
tightened properly.
Plastic plugs are not
tightened properly.
Please contact the official Cecotec
Technical Support Service to replace
the fan.
Fix the engine correctly.
Fix the kitchen hood correctly.
Readjust the distance.
Relocate and reinstall the kitchen hood.
Reposition the kitchen hood
horizontally and tighten the screws.
Reposition the kitchen hood
horizontally and tighten the plugs.