cecotec CONGA PERFECT&CLEAN CONNECTED VITAL Manual De Instrucciones página 44

ENGLISH
will start cleaning at a specific spot and will move outwards in a spiral motion (1 metre). Then,
it will return to the starting spot in an inwards spiral motion again.
- Once it has finished and returns to the starting spot, the robot will start cleaning in Auto
mode until it runs out of battery.
- Before using this mode, place it in the spot you wish to clean.
- To activate this mode, press the spiral cleaning button on the app.
Edge mode. Fig. 23
- When this mode is selected, the robot will clean along walls and around furniture (e.g.
table or chair legs).
- Press the edge cleaning button on the app.
Room mode. Fig. 24
- The robot will carry out a 30-minute cleaning cycle when this mode is selected.
- Press the room cleaning button on the app.
- To ensure an efficient cleaning of the room, make sure the robot stays in the room.
Back home mode
Press the Back home buttonon the robot or
robot to the charging base. The robot vacuum cleaner will continue vacuuming until it reaches
the charging base.
Manual mode
Select the manual cleaning mode on the app to steer your robot vacuum cleaner manually.
Power level function
Select the power level on the app to control the robot suction power during cleaning processes.
There are three suction power levels:
Cleaning scheduling
To make cleaning easier, the robot has a function that allows it to be programmed daily from
the app. According to the setting, the robot will automatically start cleaning in the selected
days at the desired time.
5. CLEANING AND MAINTENANCE
High-efficiency filter. Fig. 25-26
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to avoid these particles from
building up in the filter, causing efficiency loss. It is convenient to carry out this maintenance
once a week.
44
on the app (with
Turbo, Normal and Eco.
a house icon) in order to send the