cecotec CONGA PERFECT&CLEAN CONNECTED VITAL Manual De Instrucciones página 48

ENGLISH
The robot vacuum cleaner
does not charge.
The robot does not return
to the charging base.
The main brush does not
spin.
The robot movements or
route are unusual.
7. TECHNICAL SPECIFICATIONS
Model: Perfect&Clean Connected Vital
Product reference: 05796
Voltage: 100-240 V ~, 50/60 Hz
Rated capacity: 14.4 V DC, 2500 mAh
Typical capacity: 2600 mAh
Frequency bands: 2.4 GHz
Maximum power transmission: 20dBm
Technical specifications may change without prior notification to improve product quality.
Manufactured in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or battery must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old electrical appliances and/or their
batteries.
Compliance with the above guidelines will help protect the environment.
48
Check if the charging base indicators are on. If they are not, contact
the official Technical Support Service of Cecotec.
Clean the charging terminals with a dry cloth.
Check if the robot beeps when it gets to the charging base. Contact
the official Technical Support Service of Cecotec.
Remove the objects 1 metre on the left and right, and 2 metres in
front of the charging base.
The robot will return to the charging base faster when it is near it.
When it is far, it will take more time to identify it. Clean the charging
terminals.
Clean the main brush.
Check if the main brush is installed correctly.
Carefully clean the sensors with a dry cloth.
Restart the robot vacuum cleaner. To do so, turn the power switch
off and on.