Hikmicro FT Serie Guia De Inicio Rapido página 5

1. Brief Description
The firefighting thermal camera is a rugged, compact,
high-quality thermal imaging camera designed for
inspectors to observe in total darkness and smoke, helping
to save lives, protect property and keep inspectors safe.
Various image modes can satisfy most scenarios.
You can view live view, and capture snapshots via
HIKMICRO Viewer on your phone. You can also analyze
pictures offline, generate and share a report via the app.
Scan the QR codes on the cover to download the app.
You can download HIKMICRO Analyzer
(https://www.hikmicrotech.com/en/industrial-
products/hikmicro-analyzer-software.html) to analyze
pictures offline professionally, and generate a custom
format report on your PC.
HIKMICRO Viewer Android
2. Appearance (Page 1 – A)
The appearances of different models may vary. Please
take the actual product for reference.
2.1 Component & Interface
No. Component
1 Screen
2 Buttons
Lanyard
3 Mounting
Points
4 Interface Cover
Ring-Pull Handle
5
for Interface
Charging
6
Indicator
USB Type-C
7
Interface
8 SIM Card Slot
Neck Strap
Mounting
9
Points
10 Battery
Ring-Pull Handle
11
for Battery
12 Thermal Lens
English
HIKMICRO Viewer iOS
Function
Show the live view interface.
For operating the device.
Mount the lanyard for easy
carrying.
Protect interfaces. The
interface cover is protected
by a rubber cover on top.
Rotate to lock and unlock the
interface cover.
 Solid Red: Charging
normally.
 Solid Green: Fully charged.
 Flashing Red and Green:
Charging exception.
Charge the device or export
files with USB type-A to type-
C cable.
Reserved.
Mount the neck strap.
Supply power to the device.
Rotate to lock and unlock the
battery.
View the thermal image.
No. Component
Charging
13
Contacts
14 Tripod Mount
15 Trigger
2.2 Buttons
Button Description
Power
Button
Mode
Button
Zoom-in
Button
Note: Press and
the menu.
3. Attach Neck Strap and Lardyards (Page 2)
Attach the neck strap and retractable lanyard for easy
carrying, and to prevent accidental falls.
3.1 Neck Strap (Page 2 – B)
3.2 Lanyards (Page 2 – C)
Note: Lanyard;
① ②
4. Charge Device
Please charge the device when the battery is low. For the
first charge, turn on the device and charge it for 3 hours
until it is fully charged. The device clock may roll back to
the default time, if the device is not fully charged.
Note:
 The built-in cell battery that powers the real time clock
(RTC) of the device may drain during longtime
transportation or storage. If the rechargeable battery is
removed from device for a long time, it is
recommended to recharge the RTC battery for 10 hours
to ensure the wellfunctioning of the device clock.
 To fully charge the RTC battery, the following
requirements should be met:
3
Function
Reserved.
Mount the tripod.
Live View:
Pull the trigger to capture
snapshots.
Menu Mode:
Pull the trigger to browse
options from bottom to top.
Function
Hold to power on/off the
device.
Menu Mode:
Press to exit the menu or
return to the previous menu.
Live View:
Press to switch among image
modes.
Menu Mode:
Press to browse options from
top to bottom.
Live View:
Press to switch zoom-in levels.
Menu Mode:
Press to add value when
setting parameters or turn
on/off functions.
at the same time to enter
Retractable Lanyard.