Toshiba STOR.E D10 Manual Del Usuario página 11

Connecting the drive via eSATA
If your computer has an eSATA port, you can connect your
STOR.E D10 to the computer with an eSATA cable (sold
separately) instead of a USB cable, if you wish.
Never connect the drive to a computer with both a USB cable
CAUTION
and an eSATA cable at the same time. Doing so could damage
the drive and/or the computer and may cause data loss.
(Sample Illustration) Connecting an eSATA cable (sold separately)
Saving files to your STOR.E D10
This section provides a basic overview of how to save files to your
STOR.E D10. However, the procedure for saving files to the drive
may vary depending on the application you are using. If necessary,
please refer to the online help within your application.
To save a file to your STOR.E D10:
1. Select File, and then Save As in the application you used to
create the file.
2. Select the drive from the Save in drop-down list.
3. Enter a name for the file in the File name field.
4. Click Save.
The indicator light on your STOR.E D10 flashes as the file is
written to the disk.
User's Manual
eSATA port
STOR.E D10
EN-11