Operating Instructions
IMPORTANT: Before connecting the appliance to the power source, let it stand
upright for approximately 1 hour. This will reduce the possibility of a malfunction
in the cooling system from handling during transportation.
IMPORTANT: In case you disconnect the device or in case of power failure, wait
for 3 minutes before restarting the device.
Before switching on your appliance, make sure that:
-
the appliance is positioned in accordance with these instructions.
-
the air inlet and outlet grills are completely unobstructed.
-
the appliance is placed on a flat and stable surface.
Control Panel
Power Button: Press to turn the dehumidifier on and off.
Timer Button: Press to initiate the auto-start and auto-stop feature.
Lock (2s) Button: Press the button and hold for 2 seconds, the
control panel will be locked.
Up (+) Button: Set the humidity up.
Lighting Button: Control the LED panel to light up or go out.
Speed Button: Control the fan speed.
Down (–) Set the humidity down
9