HAEGER Digi Desumi 16 DE-D16.013A Instrucciones De Uso página 15

Faults & Processing Methods
Fault Phenomenon
Humidity always shows
"25%RH" (There is a big
difference from the actual
humidity)
Humidity always shows
"99%RH" (There is a big
difference from the actual
humidity)
Note:
Before starting the machine, please ensure that the air outlet has been opened, otherwise
the machine will overheat. Do not pull out the power cord directly to stop the machine.
Empty the Water Tank
Two ways are available to remove the collected water.
Use The Bucket
When the Water tank is already full, the WATER FULL indicator will light up, the
dehumidifier will automatically shut down until the tank has been emptied and placed
back to the unit.
Ways to Empty the Water Tank
Analysis of Causes
Humidity sensor failure?
1. Water on the surface of
the humidity sensor?
2. Humidity sensor failure?
13
Processing Method
Set the humidity to 30%RH, the
dehumidifier can still continue
to work, and can be used
normally.
Repair and replace the humidity
sensor.
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Please let the dehumidifier
keep working for a period of
time, after the water on the
surface of humidity sensor is
removed, it will return to
normal.
Repair and replace the humidity
sensor.