Publicidad
Idiomas disponibles
Idiomas disponibles
Setting Humidity
The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.
•
When it starts work, it will first automatically detect and show the room's humidity.
Press the
display will flash
•
Press
•
Press
will show the actual room humidity.
•
If the room humidity level is higher than your setting value, the dehumidifier will
automatically start working;
•
When the humidity drops to what you desire, the dehumidifier will automatically
stop and the
•
When the humidity level is set at 30%RH, the dehumidifier will work at continuous
dehumidifying mode.
Timer Setting
This TIMER setting function is designed for you to set a time to turn off or turn on the
machine, automatically by the timer.
1. Press the
timer up to 24 hours. It will start to do the countdown when you start the timer.
2. Press and hold the
timer faster.
3. If the time is set to
the light
the
seconds.
Speed Button
Control the fan speed. Press
speed. Higher fan speed will result in quicker moisture removal. Set the high speed for
maximum moisture removal. When the humidity has been reduced and quiet operation is
more preferred, set the fan speed back to Normal.
Light Function Setting
1. In the power on state, press the
backlight;
2. When light function is powered on, except the
button is on, other backlight indicators will be off.
button to change the humidity selection in 5% increments. The
and show the setting humidity.
to make the humidity increase by 5%RH.
to make it decrease by 5%RH. After no operation for 5s, the display
on the screen will flash, indicating the wet control status.
button to select the timer by 1-hour increment. You can set the
button for several seconds to make the selection of the
, this is called the invalid time. If you set the timer successfully,
will be up. The LED screen will show the remaining time if you press
button, and display the current humidity automatically after a few
to select either High (FAST) or Normal (SLOW) fan
button to turn on or turn off the
10
button and the
Publicidad
