Publicidad
Idiomas disponibles
Idiomas disponibles
LOCK (2s)
When the unit is turned on, press
be locked together with the other buttons.
To unlock the control panel, press and hold the
Power Off Memory Function
The device automatically restores the working state after power on.
If the device is turned on and a power interruption occurred, after starting the unit again,
it will keep the previous parameters of setup.
If the device is turned off and power interruption occurred, the device will still be in a
power off status when turned on.
Overflow Protection
When the water tank is full of water, the machine will turn off automatically. The indicator
light
will flash. After you empty the water from the tank, the indicator light
will turn off. The machine will start to work.
Caution:
Water tank must be placed in right position, otherwise will cause the
water full alarm.
Auto Defrost Feature
When the dehumidifier running at a lower temperature, the system will automatically
determine whether there is a presence of frost. If any frost exists, it will defrost
automatically.
Defrost Action
The fan runs at high wind speed when the compressor stops, and the LED screen displays
the defrosting symbol
Display Status Description
When the device is currently powered on, before any operation, only the "POWER" light
will be up indicating the device is in "Standby" status.
•
Setting light
flash if press TIMER button again to check and reset, and go out if non-successful
setup.
•
The lighting button
button will be on, but other backlight indicators will be off.
and hold on for 2 seconds, the control panel will
.
: If the timer is set up properly, the indicator light will be up,
: if the lighting function is powered on, the light
11
button again for 2 seconds.
Publicidad
