HAEGER iShine FH-200.017A Instrucciones De Uso página 11

Maintenance and Cleaning
•
Always unplug the device and let it cool down completely before cleaning
•
Clean the outside with a damp cloth. Never use harsh and abrasive cleaners, steel wool
or a scouring pad as this will damage the device. Do not immerse in water or other
liquid.
•
Clean de air inlet and outlet regularly with a vacuum cleaner to remove dust.
•
If you don't use the heater for a long time, pull out the plug, then clean it.
•
Before use it again, please check it and make sure the wind outlet has no sundries.
•
Warning: Don't touch the working machine and don't cover the wind outlet and inlet.
Use and replacement of the remote-control battery
1. Before using the remote control, remove the plastic insulation sheet from the
remote control by pulling it in the direction of the arrow. (see Figure 1)
2. If the battery of the remote control needs to be replaced, (see Figure 2), the first
step is to push the lock in the direction of arrow 2, the second step is to pull the
cover in the direction of arrow 3. Replace the battery, then push the cover into the
remote control in the opposite direction of the arrow 3, until it is locked.
3. The battery used is a button type lithium battery (CR2025);
Technical Data
Rated voltage
Rated input frequency
No. of heating stages
Rated power
Product type
Thermostat type
Timer type
Type of control
Protection class
Figure 1
English - 9
Figure 2
FH-200.017A
220-240V~
50Hz
2
2000W
Fixed
Electronic
Weekly
Remote control
Class II, IPX0