HAEGER iShine FH-200.017A Instrucciones De Uso página 8

Usage
1. Please check that the capacity of the electrical outlet is 220-240V~, 50-60Hz.
2. Plug the power plug into the wall socket.
3. Switch the appliance on by selecting the desired setting.
"0" is "OFF". "I" is "ON".
4. The normal way to operate the machine is by using the remote control.
5. If you cannot find or use the remote control, there is a possibility to
switch on the heater manually by pressing the small start/stop switch
under the on/off switch. This will only start the heater in high heat
with oscillation mode, press again to stop the heater.
Heating, Low heat
Heating, High heat
Light on: Set temperature mode, temperature range 18-45°C.
Light flickering: Open windows detection on.
Weekly timer
Swing
timer 1H-8H
•
Press this button to turn the heater on or off (it will take up to 30
seconds before the fan completely turns off after shutdown.
Power button
•
Use this button to choose between Low heat or High heat.
Heating
Display symbols description
Remote control
English - 6