Descargar Imprimir esta página

Coby Snapp CAM5002 Serie Manual De Instrucciones página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

camera does not power on.
Check that the rechargeable battery has been

installed correctly. The text on the battery
should face up and be legible, and the gold
contacts should face left.
The battery level may be low. Connect the

camera to a computer to charge.
the camera does not take pictures/video.
The camera's memory or memory card may be

full. Delete several files and try again.
The memory card type may not be supported.

Make sure that you are using an SD or SDHC
memory card 16GB or less in size.
The memory card format may not be sup-

ported. Make sure that you are using a FAT-
formatted card.
Troubleshooting & Support
All manuals and user guides at all-guides.com
image is blurry or out of focus.


recorded images are not saved in memory.

Blurry images or video may result when the
camera is not held steady during recording.
Hold the camera steady and try again.
Blurry images or video may result when there is
not enough light on the subject. Try recording
in a brightly lit location.
Images will not save if the camera is turned off
before data has finished processing. Be sure
to allow adequate time for the image to save
completely before turning off the video camera.
Page 31

Publicidad

loading