Publicidad
Idiomas disponibles
Idiomas disponibles
Dust and fume hazards
• Wear appropriate respiratory protection if dust or fumes are present in the work area.
• Dust and fumes generated when using power tools, and existing dust disturbed by their use, can cause ill health (for example, cancer,
birth defects, asthma and/or dermatitis). Risk assessment and implementation of appropriate controls for these hazards are essential.
The priority shall be to control them at the source.
• Direct the exhaust so as to minimize disturbance of dust in a dust-filled environment.
• All integral features or accessories for the collection, extraction or suppression of airborne dust of fumes should be correctly used and
maintained in accordance with the manufacturer's instruction.
• Do not use this tool on materials whose dust or fumes are flammable or that can cause a potentially explosive environment.
• Accessories should be selected, inspected, properly installed, maintained and replaced when worn to prevent an unnecessary increase
in dust of fumes.
Additional safety instructions for sanding operations
• Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper. Larger
sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.
Additional safety instructions for polishing operations
• Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment
strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece.
Accessory hazards
• Ensure that the accessory is correctly mounted and tightened before use.
• The abrasive disc shall be located centrally on the pad with adhesive or lock device as required and intended.
• Do not use grinding or cut-off wheels with a rotary sander/polisher.
• Accessory manufacturers' safety precautions and warnings, operating restrictions, and installation or mounting instructions shall be followed,
unless it contradicts information provided in this manual or other literature provided with the tool. For contradictory information follow whichever
is the most restrictive guideline.
Refer to Product Information Manual for Model Specific Safety Information.
Safety Symbol Identification
Wear Respiratory
Protection
(Dwg. 16589525)
Safety Information - Explanation of Safety Signal Words
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
CAUTION
property damage.
Indicates information or a company policy that relates directly or indirectly to the safety of personnel or
NOTICE
protection of property.
Product Safety Information: Battery
Product Description
A Battery is an electric energy storage device used as the power source for Ingersoll Rand Cordless Products.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
General Battery Safety Warnings
• Save all warnings and instructions for future reference.
• It is your responsibility to make this safety information available to others that will operate this product. Failure to follow standards and
regulations can cause personal injury.
• Always install, operate, inspect and maintain this product in accordance with all applicable standards and regulations (local, state,
country, federal, etc.). Compliance is your responsibility. Failure to follow standards and regulations can cause personal injury.
• The term "power tool" in the warnings refers to your battery-operated (cordless) power tool.
TL-G4621-LIK_ed2
Wear Eye
Wear Hearing
Protection
Protection
NOTICE
Wear Eye and Hearing
Read Manuals Before
Protection
WARNING
Risk of burn; surface
Operating Product
may be hot.
EN
EN-4
Publicidad
