Publicidad
Idiomas disponibles
Idiomas disponibles
off the lamp and press [Enter] to confirm or [Mode] to cancel and return to the main menu.
- Demo sequences
This function allows you to run a special demo-test sequences without an external controller, which will show
you some possibilities of using MH-660. Press [Up] and [Down] keys to select the "Mod1" or "Mod2"
sequences. The "Mod1" is suitable for projections on the wall, ceilling or ground without any head-
movement, the "Mod2" uses all MH-660 functions and therefore is good for a complete introduction of the
fixture.
- Reset Function
Press [Enter] key to run reset. This option enables the MH-660 to index all effects (functions) and return to
their standard positions.
SPEC -Special functions
Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing
[Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]
keys to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
- Lamp On automatically
This function enables to switch on the lamp automatically after switching on the fixture. Use the [Up] and
[Down] keys to select „On" if you wish to switch on the lamp automatically after switching on the fixture or
„Off" if you wish the lamp off after switching on the fixture and press [Enter] to confirm or [Mode] to cancel
and return to the menu.
- DMX values
Readout DMX values of each channel received by the fixture. Use the [Up] and [Down] keys to select
desired channel and press [Enter] to read its value coming to the fixture or [Mode] to cancel and return to
the menu.
All manuals and user guides at all-guides.com
44
Publicidad
