Johnson EGA Serie Manual De Instrucciones página 37

SAFETY INSTRUCTIONS
Do not operate the machine in rooms with a tempe-

rature of below 5°C. This can cause damages to parts of
it. If it is unavoidable, make sure to drain the water
completely from the appliance after every use (see
"Maintenance - Cleaning of drain pump filter") to avoid
damages caused by frost.
 Never use flammable sprays or substances in the imme-
diate proximity of the appliance.
INSTALLATION
Remove all packaging material and transport bolts

before using the appliance. Otherwise, serious damage
may result.
 This appliance is equipped with a single inlet valve and
can be connected to the cold water supply only.
 Mains plug must be accessible after installation.
 Before washing clothes for the first time, the product
shall be operated once throughout all the procedures
without any clothes inside.
 Before using the washing machine, the product shall
be calibrated.
 Do not put any excessively heavy objects on the
appliance, like water containers or heating devices.
 The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
 Max. Inlet water pressure 1 MPa. Min. inlet water pressure
0.05 MPa.
ELECTRICAL CONNECTION
Make sure the supply cable is not trapped by the ma-

chine, it can get damaged.
Connect the product to a grounded outlet protected by

a fuse complying with the values in the "Technical
specifications" table. The grounding installation has to be
made by a qualified electrician. Ensure that the machine
is installed in accordance with the local regulations.
5