Descargar Imprimir esta página

Toro TimeCutter 5000 Manual Del Operador página 23

Cortacésped de asiento
Ocultar thumbs Ver también para TimeCutter 5000:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating the Throttle
You can move the throttle control between the F
and S
positions
(Figure
LOW
Always use the F
position when engaging the PTO.
AST
Figure 19
Operating the Choke
Use the choke to start a cold engine.
1.
Pull up the choke knob to engage the choke
before using the key switch
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2.
Push down the choke to disengage the choke
after the engine has started
Figure 20
1. O
position
N
AST
19).
g295539
(Figure
20).
(Figure
20).
g295540
2. O
position
FF
Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
21
Figure 21
g295541

Publicidad

loading

Este manual también es adecuado para:

Timecutter mx 50007575075750ta75750w75759